Talc Powder 1250 Mesh
1250 mesh talc powder with stable 30% SiO₂ and ≥93 whiteness. D50 6 µm, D97 ≤12 µm — a fine talc filler for modified plastics, EVA foaming and premium rubber…
View Talc Powder 1250 MeshOur mineral powders enhance coating opacity, brightness, and weather resistance. They serve as extender pigments that improve film properties and reduce formulation costs.
Our mineral powders enhance coating opacity, brightness, and weather resistance. They serve as extender pigments that improve film properties and reduce formulation costs.
Send us your formulation target and we will propose a grade with a TDS and free sample.
1250 mesh talc powder with stable 30% SiO₂ and ≥93 whiteness. D50 6 µm, D97 ≤12 µm — a fine talc filler for modified plastics, EVA foaming and premium rubber…
View Talc Powder 1250 MeshHigh-purity dolomite powder with fine particle size, suitable for coatings, plastics, glass and ceramic manufacturing.
View Dolomite Powder 2000 MeshPrivate label in minerals is a specification decision wearing a brand. What OEM transfers, why the mesh number under your logo needs a named test…
Read articleTalc in coatings is a functional filler, not a cheap white: lamellar barrier effect, anti-settling, sanding and matting, the oil absorption…
Read articleMost factory audits produce a folder of photocopies and a recommendation that answers nothing. This checklist treats the audit as a measurement:…
Read articleThe trade-off is particle size against oil absorption. Finer grades disperse more readily and support higher gloss, but their higher surface area raises oil absorption and can affect hiding power. Matte and textured systems tolerate — and often prefer — a coarser or more structured filler. The right starting point depends on your resin, pigment volume concentration and whether you are grinding in-house. Send us those details and we will propose a grade with a sample.
In most cases yes. Send the competitor's TDS or, better, a sample of the actual material together with the properties you are trying to match. We can reproduce a specification even when we cannot identify the original ore body, because what matters commercially is the specification and the consistency between batches. Samples for comparison are free.
Consistency is controlled against our written enterprise standards, not by eye. Whiteness is one of the parameters we test in-process, and any result outside the agreed range is held rather than shipped. For coated and paper grades we recommend a combined COA and pre-shipment sample, since colour can read differently between application methods. Final conformity is confirmed on the batch sample.
Mineral powders serve as functional fillers in plastic manufacturing, improving mechanical strength, dimensional stability, and heat resistance…
View Plastics applicationsCalcium carbonate and talc powders are essential in paper making as fillers and coating pigments, improving paper brightness, opacity, and…
View Paper applicationsMineral fillers reinforce rubber compounds, improving tensile strength, tear resistance, and processing characteristics in tire and industrial…
View Rubber applicationsDolomite powder provides essential MgO and CaO for glass batch formulations, while talc serves as a flux agent in ceramic body and glaze compositions.
View Glass & Ceramics applicationsThe quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.
“This document provides guidance on instrument qualification and size distribution measurement of particles in many two-phase systems (e.g. powders, sprays, aerosols, suspensions, emulsions and gas bubbles in liquids) through the analysis of their light-scattering properties.”
— ISO — International Organization for Standardization, ISO 13320:2020, Particle size analysis — Laser diffraction methods, official source
“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”
— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source
Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.