Dolomite Powder 2000 Mesh
High-purity dolomite powder with fine particle size, suitable for coatings, plastics, glass and ceramic manufacturing.
View Dolomite Powder 2000 MeshDolomite and calcium carbonate powders are widely used in construction materials including cement, adhesives, sealants, and roofing materials.
Dolomite and calcium carbonate powders are widely used in construction materials including cement, adhesives, sealants, and roofing materials.
Send us your formulation target and we will propose a grade with a TDS and free sample.
High-purity dolomite powder with fine particle size, suitable for coatings, plastics, glass and ceramic manufacturing.
View Dolomite Powder 2000 MeshPrivate label in minerals is a specification decision wearing a brand. What OEM transfers, why the mesh number under your logo needs a named test…
Read articleCalcite sand grades for terrazzo: the chip, the matrix filler and the grout coat, cement vs resin systems, hardness and acid limits, and how to…
Read articlePolished and natural pebbles are two surfaces of the same stone, not two grades of it. What polishing mechanically does, what natural has to mean…
Read articleIn dry mixes and cementitious systems the powder acts mainly as a filler and can improve workability and reduce density, provided the particle size and chemistry suit the system. Grade matters because a finer or denser grade changes water demand. For most construction use the practical question is cost per delivered tonne rather than peak performance, so we can often propose a grade that meets the technical requirement at a lower cost.
That depends entirely on the formulation and the exposure conditions, not on the powder alone. What we can confirm is our own product specification and its consistency between batches. For outdoor or freeze-thaw applications the binder, the grading and the overall mix design normally dominate performance, so we recommend that you share the mix design so we can check the mineral specification against it.
The standard MOQ is one 20 ft container, roughly 25–27 tonnes depending on grade and packaging. For project work we can also quote split deliveries against a phased schedule, so a large project does not require storing the full quantity at once. Send your required volume, delivery window and destination port and we will work out the most practical shipping plan.
Mineral powders serve as functional fillers in plastic manufacturing, improving mechanical strength, dimensional stability, and heat resistance…
View Plastics applicationsOur mineral powders enhance coating opacity, brightness, and weather resistance. They serve as extender pigments that improve film properties and…
View Coatings & Paint applicationsCalcium carbonate and talc powders are essential in paper making as fillers and coating pigments, improving paper brightness, opacity, and…
View Paper applicationsMineral fillers reinforce rubber compounds, improving tensile strength, tear resistance, and processing characteristics in tire and industrial…
View Rubber applicationsThe quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.
“This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.”
— ISO — International Organization for Standardization, ISO 3262-1:2020, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods, official source
“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”
— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source
Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.