TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636

Paper

Calcium carbonate and talc powders are essential in paper making as fillers and coating pigments, improving paper brightness, opacity, and printability.

How mineral powders are used here

Calcium carbonate and talc powders are essential in paper making as fillers and coating pigments, improving paper brightness, opacity, and printability.

What we match against

  • Ultra-fine particle size
  • high brightness
  • narrow particle distribution

Talk to us

Send us your formulation target and we will propose a grade with a TDS and free sample.

Enquire about this grade

We reply within one business day. Your details are used only to answer this inquiry.

Recommended products

1250Whiteness ≥ 93

Talc Powder 1250 Mesh

1250 mesh talc powder with stable 30% SiO₂ and ≥93 whiteness. D50 6 µm, D97 ≤12 µm — a fine talc filler for modified plastics, EVA foaming and premium rubber…

View Talc Powder 1250 Mesh
325Whiteness 75-94

Talc Powder 325 Mesh

High-quality 325 mesh talc powder with customizable whiteness 75-94 and silica 15%-60%. High pass rate industrial talc filler for paint, plastic, rubber, ceramic…

View Talc Powder 325 Mesh

Related reading

Frequently Asked Questions

Which grade is used for paper coating versus filling?

Coating and filling are different jobs. Coating needs very fine, narrow particle size distribution so the coat does not settle and the surface stays smooth for printing; filling relies more on bulk and opacity per unit weight, and is often a coarser or cheaper grade. If you tell us whether the application is coating, filling or both, we can narrow the choice considerably.

How is brightness measured and can you supply it on the COA?

Brightness is reported as part of our standard product data, and it can be included in the batch COA on request. Because different instruments and geometries give different readings, we will agree the measurement basis with you in advance and state it on the COA, so the number on our report and the number in your own lab refer to the same test.

What are the practical constraints for coating-grade supply?

Coating grades are the tightest specification we run, so it helps to plan ahead: longer lead time than standard filler grades, and a MOQ that makes one container the sensible starting point. Production is 10–3000 mesh overall, but the finest coating grades are the ones we schedule first for each new run. Send your target brightness and particle size early and we will confirm what is achievable against a real sample.

Other industries

Plastics

Mineral powders serve as functional fillers in plastic manufacturing, improving mechanical strength, dimensional stability, and heat resistance…

View Plastics applications

Rubber

Mineral fillers reinforce rubber compounds, improving tensile strength, tear resistance, and processing characteristics in tire and industrial…

View Rubber applications

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.”

— ISO — International Organization for Standardization, ISO 3262-1:2020, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp