TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636

Magnesium Products Manufacturer

Dead burned magnesia (DBM), caustic calcined and electro-fused magnesia, plus magnesium sulphate — MgO 85–99%. Produced in our own plant in Haicheng, China. Custom specification, free samples, third-party inspection available.

HS code: 251990 / 283321 6 specifications Lump 0–10 mm, sand & powder 200 mesh

Overview

Magnesium Products — TDHX Minerals, China

Our magnesia range spans the full calcination spectrum from reactive to fully fused. Caustic calcined magnesia (700–1000 °C) is chemically active, for magnesium cement, desulphurisation and feed. Dead burnt magnesia (above 1600 °C) is dense and stable, the base aggregate for magnesia carbon bricks and monolithic refractories. Electro-fused magnesia (above 2800 °C) has the largest crystals and the best slag resistance. We also supply magnesium sulphate heptahydrate and monohydrate for agricultural and industrial use.

At a glance

  • Mesh sizeLump 0–10 mm, sand & powder 200 mesh
  • Packaging25/50 kg bags, jumbo bags, OEM print
  • MOQ1 × 20 ft container (~25 t)
  • Lead time7 – 15 days after spec confirmed
  • TDSAvailable on request

Enquire about this product line

Tell us the grade, mesh and chemistry you need — or the application you are working on — and we will reply with a quotation and a free sample within one business day.

Enquire about this grade

We reply within one business day. Your details are used only to answer this inquiry.

Products in this category

Related industries

Frequently Asked Questions

Which magnesia products do you supply?

Caustic calcined magnesia (CCM, MgO 85–95%), dead burnt magnesia (DBM, MgO 96–99%), electro-fused magnesia (MgO ≥ 98%), high purity magnesia sand, plus magnesium sulphate heptahydrate (99.5%) and monohydrate.

What is the difference between caustic calcined, dead burnt and fused magnesia?

CCM is calcined at 700–1000 °C and is chemically reactive, used for magnesium cement, desulphurisation and feed. DBM is sintered above 1600 °C for high density and is the base for refractory bricks. Fused magnesia is arc-melted above 2800 °C, giving the largest crystals and the best slag resistance.

Can I get custom MgO content and particle size?

Yes. MgO can be tailored across 85%, 90%, 92%, 94%, 95%, 96%, 97%, 98% and 99%, with powders from 120 mesh to granules of 0–1 mm, 1–3 mm, 3–5 mm or larger.

Do you provide third-party test reports?

Yes. We test every batch in-house and can arrange SGS or other third-party inspection on request, at the buyer's cost.

Related reading

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document specifies the test methods to be used for magnesium oxide intended for use in the rubber industry as a stabilizer and vulcanizing agent. The choice of the properties to be determined and the values required are subject to agreement between the interested parties.”

— ISO — International Organization for Standardization, ISO 21869:2022, Rubber compounding ingredients — Magnesium oxide — Methods of test, official source

“This document provides guidance on instrument qualification and size distribution measurement of particles in many two-phase systems (e.g. powders, sprays, aerosols, suspensions, emulsions and gas bubbles in liquids) through the analysis of their light-scattering properties.”

— ISO — International Organization for Standardization, ISO 13320:2020, Particle size analysis — Laser diffraction methods, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp