TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636

Steel & Metal Smelting

Refractory linings for steel ladles, electric arc furnaces, and non-ferrous metal smelting operations.

How mineral powders are used here

Refractory linings for steel ladles, electric arc furnaces, and non-ferrous metal smelting operations.

What we match against

  • High density
  • slag resistance
  • thermal stability above 1500°C

Talk to us

Send us your formulation target and we will propose a grade with a TDS and free sample.

Enquire about this grade

We reply within one business day. Your details are used only to answer this inquiry.

Recommended products

Related reading

Frequently Asked Questions

Which magnesia grade is used in steelmaking refractories?

The grade follows the service position in the furnace rather than a single generic description, because lining wear differs between the furnace wall, the slag line and the hearth. Tell us which position the material is going into, the working temperature and whether you are using magnesia-carbon, and we will propose a grade accordingly. Our magnesium range covers MgO 85–99%.

How do you check slag resistance and thermal stability?

These are properties of the finished material, verified against the published specification for the grade, and they are what a trial lining is designed around. What we supply is the material to that specification with consistent batch behaviour, plus the documentation that lets you compare it fairly against your incumbent. If your acceptance test is a specific slag test, tell us the method and we will supply consistently across the trial and the production batches.

Can you supply in quantities that fit furnace relining schedules?

Yes. The standard MOQ is one 20 ft container, roughly 25–27 tonnes, and lead time is 7–15 days after the specification and packaging are confirmed. For relining work we can quote against your shutdown window and plan part deliveries, so material arrives close to when the furnace is available rather than sitting in your yard. Send the schedule and we will map the shipments to it.

Further reading: definitions, comparisons, selection

Other industries

Plastics

Mineral powders serve as functional fillers in plastic manufacturing, improving mechanical strength, dimensional stability, and heat resistance…

View Plastics applications

Paper

Calcium carbonate and talc powders are essential in paper making as fillers and coating pigments, improving paper brightness, opacity, and…

View Paper applications

Rubber

Mineral fillers reinforce rubber compounds, improving tensile strength, tear resistance, and processing characteristics in tire and industrial…

View Rubber applications

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.”

— ISO — International Organization for Standardization, ISO 3262-1:2020, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp