
Magnesium oxide leaves China under HS 2519.90 - one subheading for caustic-calcined, dead-burned and fused magnesia. This guide reads heading 25.19, shows where magnesium sulphate and magnesite differ, and how national tariff lines split the same code.
Classification is the first paperwork question on any magnesia enquiry: buyers ask whether caustic-calcined magnesia, dead-burned magnesia and electro-fused magnesia share one code, and where products such as magnesium sulphate fall instead. This guide reads heading 25.19 of the Harmonized System line by line, explains why our magnesium oxide line — caustic-calcined magnesia (CCM), high-purity dead-burned magnesia sand and electro-fused magnesia — declares under HS 2519.90, and shows why the same six digits can split into different national lines at destination.
Where Magnesium Oxide Sits in the Harmonized System
Heading 25.19 of the HS nomenclature reads: “Natural magnesium carbonate (magnesite); fused magnesia; dead-burned (sintered) magnesia, whether or not containing small quantities of other oxides added before sintering; other magnesium oxide, whether or not pure” (source: the US Harmonized Tariff Schedule published by the USITC, hts.usitc.gov). Two six-digit subheadings hang below it:
- 2519.10 — natural magnesium carbonate (magnesite): the raw, uncalcined mineral as mined.
- 2519.90 — other: every calcined or melted magnesia product in the heading.
What 2519.90 covers
All three forms we ship sit inside 2519.90. Caustic-calcined magnesia (light-burned, reactive MgO for environmental protection and chemical use), dead-burned (sintered) magnesia and electro-fused magnesia (dense, high-MgO grades for refractory materials and steel and metal smelting). Calcining, sintering and melting change density and reactivity, but the product remains magnesium oxide — so the six-digit code does not move between grades. Note the phrase “whether or not pure” in the heading text: high-purity grades do not leave 2519.90 on purity alone.
What is not 2519.90
The boundary matters as much as the heading itself:
- Magnesite ore that has not been calcined belongs to 2519.10, not 2519.90.
- Dolomite carries its own heading — our dolomite powder declares under 2518, a different code from magnesia even though both are magnesium-bearing minerals.
- Magnesium sulphate (our heptahydrate and kieserite) is a chemical salt, not an oxide: it declares under heading 28.33, subheading 2833.21.
- Magnesium hydroxide also sits in chapter 28 (heading 28.16), outside 25.19 altogether.
One supplier can legitimately ship neighbouring products under different chapters — the mineral's chemical nature, not the supplier, decides the code. The same logic runs through our talc powder HS code guide (heading 25.26) and our white sand HS 2505.10 guide (heading 25.05).
One Subheading, Many National Tariff Lines
The six-digit code is international; the lines below it are not. The same 2519.90 splits differently in two major destination markets:
- United States (HTS): 2519.90.10 covers “fused magnesia and dead-burned (sintered) magnesia”; 2519.90.20 covers “caustic calcined magnesite”; 2519.90.50 is the residual “other” line (USITC HTS).
- European Union (CN/TARIC): 2519 90 10 “magnesium oxide, other than calcined natural magnesium carbonate”; 2519 90 30 “dead-burned (sintered) magnesia”; 2519 90 90 “other” (European Commission TARIC database, ec.europa.eu).
So the code on a magnesia shipment is decided twice: once by the international six digits, then again by the destination schedule. The practical fix is on the documents — state the form (caustic-calcined, dead-burned or fused) and the MgO grade on the commercial invoice, so your broker can select the right national line without guessing. Duty treatment follows the national line, which is exactly why the form must be written out rather than collapsed into a generic “magnesium oxide” description.
Keeping the Code Consistent Across Shipping Documents
A classification only holds if every document tells the same story. Before a magnesia container books, we check the code against the full document set:
- Commercial invoice — product name, form (CCM / dead-burned / fused), MgO grade and HS code, all matching.
- Packing list — mesh band and packaging (25/50 kg bags or 1000/1250 kg FIBCs) consistent with the invoice description.
- Certificate of analysis — the chemical panel (MgO, SiO2, CaO, LOI) must support the declared form and grade; a COA that contradicts the invoice invites a customs query.
- Certificate of origin — the same product name and code as the invoice, issued on the same wording.
If the destination broker reclassifies within the national schedule — for example moving a line between fused and dead-burned — the six-digit code usually stays put; only the national suffix changes. That is why we keep the material facts (form, grade, processing) visible on every document instead of arguing the code after arrival.
How We Declare the TDHX Magnesia Line
Our declared codes follow the product pages on the magnesium category page: caustic-calcined magnesia, dead-burned magnesia sand and electro-fused magnesia all declare under 2519.90, while magnesium sulphate in both hydrate forms declares under 2833.21. China's own ten-digit export lines below 2519.90 are confirmed with the customs broker at booking, and we mirror whatever line the booking uses on the final invoice.
If you are quoting a magnesia grade against a tender, send the destination country and the intended use — we will return the declared code, the grade explanation for magnesium oxide and a matching COA template, so your broker and your QA team read the same shipment the same way.


