TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636
Technical insight

White Sand Export HS Code 2505.10 Explained

White Sand Export HS Code 2505.10 Explained

White sand leaves China under HS 2505.10, the silica and quartz sands subheading of heading 25.05. This guide reads the six digits, explains why washing, screening and colour sorting do not change the classification, and shows how the code stays consistent across invoice, packing list and certificate.

When a white sand order moves from inquiry to contract, the first document question is rarely about whiteness or mesh — it is "which HS code goes on the declaration?" For our snow white sand and washed quartz sand the answer is HS 2505.10, the silica sands and quartz sands subheading. This guide explains how the six digits are built, why processing steps such as washing, screening and colour sorting do not change the classification, and what to check so the code stays consistent from our proforma invoice to your customs entry.

Where White Sand Sits in the Harmonized System

The Harmonized System (HS) is the international classification behind every customs declaration. Chapter 25 — "Salt; sulphur; earths and stone; plastering materials, lime and cement" — gathers natural mineral products that have only been washed, crushed or screened. Inside it, heading 25.05 covers natural sands, whether or not coloured, and splits into two six-digit subheadings: 2505.10 for silica sands and quartz sands, and 2505.90 for other natural sands.

Our white sand line — colour-sorted snow white sand 20-40 mesh and 40-80 mesh, plus washed quartz sand in 4-70 mesh — is high-silica natural sand, so it declares under 2505.10. The white sand category page lists every grade we ship.

Reading the Six Digits

What 2505.10 covers

Subheading 2505.10 is not limited to glass-grade transparent quartz. It covers natural silica sand — sand whose dominant mineral is quartz — whatever the end use: glassmaking, filtration media, foundry work or construction applications. Colour sorting and magnetic separation, both of which our sand goes through, are standard beneficiation: they remove impurities but do not transform the material into something new.

Where 2505.90 comes in

"Other natural sands" catches sands classified by something other than their silica content. If a buyer actually needs crushed dolomite or another carbonate product, the conversation moves to a different heading altogether — the same logic is why talc leaves China under heading 25.26, as we explain in our talc powder HS code guide. One supplier can legitimately ship different products under different chapters: the mineral, not the supplier, decides the code.

What Does Not Change the Code

Buyers often worry that a specification change forces re-classification. In practice, none of the following moves white sand out of 2505.10:

  • Mesh size. 20-40 mesh, 40-80 mesh, 4-70 mesh — classification follows the nature of the material, not the aperture it passed through. Our mesh size guide maps each grading to its applications.
  • Whiteness. Colour sorting raises whiteness; it does not create a new product.
  • Washing and screening. Both are accepted preparation for natural sands.
  • Packaging. 25/50 kg bags or 1,000-1,250 kg ton bags — the code is identical.

Processing that transforms the material itself — sustained heat treatment, for example — can move a product out of the natural-sands heading. Our white sand is not heat-treated; if your application requires calcined material, flag it early so your broker confirms the code before booking.

From Six Digits to Your Import Duty

The six digits are only the international floor. Below them, each country adds its own digits: China's export declaration runs to a ten-digit tariff line, and your destination country applies its own schedule — commonly 8 to 10 digits — to compute duty, tax and trade statistics. Two practical consequences:

  • Confirm the duty with a local broker. Duty treatment for silica sand differs by destination, and preferential rates depend on the origin certificate, not on the code alone.
  • Keep the description aligned. Your customs entry, our commercial invoice and the bill of lading should describe the goods the same way. Divergence between "snow white sand", "silica sand" and "quartz sand" on parallel documents is a classic cause of clearance delays; our export documents checklist shows how we keep the set consistent.

How We Write the Code into Quotations and Documents

On every white sand quotation we print the HS code next to the grade, mesh band and packaging. When the order reaches the shipping stage, the same code and description carry through the invoice, packing list and certificate of origin — the same paperwork chain described in our guide to container loading for mineral powder. If you appoint a third-party inspector, the code also appears in the inspection scope, so the certificate your broker files matches the goods in the container.

One note for first-time importers: the code on our documents is the export classification from the Chinese side. Your import classification is filed under your own country's schedule and remains your broker's call — we supply the material facts (mineralogy, mesh, processing) they need to defend it.

Quick Checklist Before You Book

  • Ask for the HS code in writing on the proforma invoice — for our white sand, HS 2505.10.
  • Give your broker the grade, mesh band and processing description, not just the code.
  • Check whether your destination applies a specific tariff line to silica sands.
  • Keep product descriptions identical across invoice, packing list and B/L.
  • If you need a different mineral — crushed stone, carbonate, talc — expect a different heading, and ask us early.

A wrong code rarely announces itself at the factory gate; it shows up as a customs query three days before your production line runs dry. Getting 2505.10 written correctly on day one — and keeping it identical across every document in the chain — is the cheapest insurance in the whole shipment. If you are sourcing white sand and want the paperwork to match the material, start from the grade list and ask us for a sample and a proforma invoice.

Frequently Asked Questions

Does the HS code change between 20-40 mesh and 40-80 mesh?

No. Classification follows the nature of the material, not the particle size band. Our snow white sand in 20-40 mesh, 40-80 mesh and washed quartz sand in 4-70 mesh all declare under HS 2505.10, the silica sands and quartz sands subheading of heading 25.05.

Who is responsible if the code is questioned at destination?

Import classification is filed under your country's own tariff schedule and is your broker's call. We support it with the material facts a broker needs - mineralogy, mesh band, processing steps - and keep the code and description consistent across our invoice, packing list and certificate of origin.

Can the HS code appear on the commercial invoice?

Yes. On request we print HS 2505.10 on the proforma invoice, commercial invoice and packing list, next to the grade, mesh band and packaging, so your broker files the entry against documents that match the goods in the container.

Related articles

Who is responsible for this page

  • PublisherThis article is published by Dalian Taiding Hengxin International Trade Co., Ltd., the export arm of Haicheng Taiding Huaxin Mineral Products Processing Co., Ltd., whose plant is in Haicheng, Liaoning, China.
  • Basis of the dataMesh, whiteness, chemistry and moisture figures come from retained production samples and batch inspection records of our own plant. Statements about standards are quoted verbatim in the sources section at the end of this page, each with a link to the issuing body's official page.
  • Updates and correctionsThis article was last updated on . If you find an error in a figure or a statement, write to info@tdhxtrade.com and we will verify and correct the page, updating the date at the top.

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This test method covers the determination of the particle size distribution of fine and coarse aggregates by sieving.”

— ASTM International, ASTM C136/C136M-25, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp