TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636
Technical insight

Mineral Powder Payment Terms: What a 30% Deposit Really Covers

Mineral Powder Payment Terms: What a 30% Deposit Really Covers

A 30% deposit with the balance to follow is the workhorse payment structure in mineral powder exports. This guide explains what the deposit commits, the two common balance trigger points, L/C variants, and the clauses that keep money and documents in step.

Almost every mineral powder enquiry that moves past price asks the same quiet question: how does the money move? The structure buyers refer to most often is the one written into the search itself — a 30% deposit to start the order, and the balance paid either before shipment or against the shipping documents. It is a workable default for bagged talc, calcium carbonate, dolomite and magnesia shipments, but only when both sides agree on what the deposit commits, when the balance falls due, and which documents release it.

This article walks through the 30/70 pattern as it is actually used in mineral powder exports: what the deposit stage covers, the two common trigger points for the balance, how the same logic sits inside a letter of credit, and the clauses that keep money and documents in step. One policy note up front: we work on T/T and L/C at sight, and the exact schedule for each order is confirmed on the proforma invoice alongside the full document set, which is the paper the payment clause should always point back to.

Why 30/70 became the trade's working default

The split is a compromise between two honest positions. A supplier asked to produce a specific grade — a 1250 mesh talc inside an agreed whiteness window, a 2000 mesh dolomite to a chemistry sheet — commits real cost before any cargo exists: ore allocation and blending, mill time on a particular line, packaging, inland haulage and vessel booking. Asking a buyer to cover all of that before a vessel is even in sight is not reasonable either. The deposit shares the exposure: enough money down that the supplier's production slot is real, enough withheld that the buyer's leverage survives until documents exist.

Thirty percent is not a magic number and nothing in any standard makes it obligatory. It became common because it roughly matches the front-loaded share of cost in a bagged powder order — raw materials and processing typically outweigh documentation and margin — while leaving the majority of the invoice, where quality risk actually lives, behind the documents. Sellers of low-unit-value, high-volume cargoes lean towards higher deposits; buyers with long relationships often negotiate the deposit down. Both directions are normal, and neither is by itself a signal about trustworthiness.

What the deposit actually buys

A deposit is best read as payment for committed capacity, not as a down payment on the cargo. Between receipt of the deposit and loading day, the supplier typically reserves and blends the ore for the grade, schedules grinding and classification on a specific mill line, produces the run and takes per-batch samples, packs into 25/50 kg bags or 1000–1250 kg jumbo bags, and trucks the lot to port for the booked vessel. Each of those steps consumes capacity that has been turned away from other orders.

This is also why deposits are rarely refundable in full once production starts. The fairer question for negotiation is not “can we get the deposit back” but “what happens to committed work if either side has to stop” — a question the contract should answer explicitly, stage by stage, before the deposit moves.

The two trigger points for the balance

Balance before shipment

The most common arrangement for powder cargoes: the balance falls due once the goods are produced, inspected and ready to load, and the full document set is released only after funds arrive. Suppliers favour it because the cargo is finished and measurable; buyers accept it because they have seen the pre-shipment evidence — the batch COA, and on orders where one was commissioned, the third-party inspection report — before the final transfer. The pre-shipment balance is also the natural moment to fix the paperwork: invoice, packing list, bill of lading and certificate of origin must already agree with each other, because amendments after funds move are slow.

Balance against the B/L copy

Paying the balance against a copy of the bill of lading shifts the trigger from “goods ready” to “goods on board”. The buyer pays after loading, usually within a stated number of days of the B/L date, against the document set sent electronically. It gives the buyer a little more float and ties the final payment to an event that has actually happened. The supplier's exposure is longer, which is why the arrangement is usually earned by history: first orders start at balance-before-shipment, and the trigger moves after both sides have seen each other perform.

Where the same logic sits inside an L/C

A letter of credit at sight replaces the deposit question with a documents question: the bank pays against compliant documents, so the payment rhythm lives in the paperwork rather than in transfers. The 30/70 pattern can still appear — as an L/C for the full invoice value drawn at sight, or in hybrid structures where part is paid by T/T and the balance by credit — but every variant trades payment certainty for document precision. Any discrepancy, even a transposed figure, gives the bank a reason to withhold payment until it is corrected. Buyers who choose an L/C for a first order are buying exactly that discipline; the cost is bank charges and zero tolerance for sloppy documents, which is why the documents checklist matters more under a credit than under T/T.

Payment milestones and quality documents must read as one packet

The payment clause and the quality clause usually sit on different pages of a contract, and that separation is where disputes incubate. A well-built contract ties them together. The specification should name test methods, not just limits — general test methods for extenders to ISO 3262-1 on the chemistry lines, and sieve analysis with test sieves to ISO 3310-1 where fineness is controlled by screening — and the batch COA should report results against those same named methods. Then the payment trigger can reference them cleanly: the balance is released against a COA that reads on the agreed basis, for a lot whose sealed reference samples are retained on both sides.

When a buyer asks us to confirm a schedule, the practical answer always comes back to the same packet: the proforma invoice fixes the commercial figures, the COA fixes the batch figures, and both must agree with the shipping documents. A payment schedule that ignores the packet is just a calendar; one welded to it is a control system.

What the deposit covers — and what it never covers

A deposit commits production. It does not commit outcomes no honest supplier can promise in advance: a specific certificate value on a natural product, a destination-side test result, or freedom from every handling risk in transit. That is why the specification tolerance, the COA basis and the inspection scope matter more than the deposit percentage — the deposit sizes the commitment, but the documents define it. Buyers who feel under-protected at 30% are usually better served by tightening the document packet (adding an inspection, naming methods, fixing retained samples) than by pushing the balance trigger later.

Negotiating the schedule without slowing the order

Payment terms go smoothly when they are settled as part of the enquiry, not after it. Five questions do most of the work:

  • Which instrument — T/T, L/C at sight, or a hybrid — and who carries the bank charges?
  • What does the deposit commit on the supplier's side, and what happens to committed work if the order stops?
  • When does the balance fall due — before shipment or against the B/L copy — and within how many days?
  • Which document set releases the balance, and does each document agree with the proforma invoice?
  • What evidence moves before the balance — batch COA, sealed samples, third-party inspection?

Answers to those five questions fit on half a page and prevent most of the payment friction seen in powder trade. They also interact with order size: a single 20 ft container of 25–27 tonnes settles very differently from a repeat programme, and buyers planning volumes can start from the MOQ guide and the container-loading notes before fixing the schedule.

If you are mapping a first order, the practical path is the usual one: agree the grade and specification, agree the packet of documents, then let the payment schedule follow. The grades most often shipped under deposit-then-balance terms — talc powder, ground calcium carbonate, dolomite powder and the magnesia range — each carry their own specification and packaging notes, and every term above is confirmed in writing on the proforma invoice before the deposit moves.

Frequently Asked Questions

Is a 30% deposit mandatory, and can it be negotiated?

No percentage is written into any standard — 30/70 is a widely used trade structure, not a rule. What actually moves in negotiation is the split, the trigger point for the balance and the evidence released before it. A first order usually starts at the more protective end for the supplier; a relationship with a clean history earns movement. Settle the schedule in writing on the proforma invoice rather than arguing percentages in the abstract.

Should the balance be paid before shipment or against the B/L copy?

It depends on which risk you would rather carry and how much history exists. Balance before shipment gives the supplier certainty and gives the buyer the pre-shipment evidence — the batch COA, and an inspection report where one was commissioned — before paying. Balance against the B/L copy moves the trigger to an event that has already happened and gives the buyer a few days of float, at the cost of a longer exposure for the supplier. First orders commonly start with the former; the trigger moves once both sides have seen each other perform.

Does the 30% deposit protect us if quality fails at destination?

Not by itself, and it was never designed to. The deposit commits production; the protection against quality failure lives in the specification tolerance, the named test methods on the COA and the sealed retained samples. If those are thin, pushing the balance trigger later only delays the argument without strengthening it. Buyers who feel under-protected get more from a tighter document packet — named methods, agreed tolerances, third-party inspection where the risk warrants it — than from a lower deposit percentage.

Related articles

Who is responsible for this page

  • PublisherThis article is published by Dalian Taiding Hengxin International Trade Co., Ltd., the export arm of Haicheng Taiding Huaxin Mineral Products Processing Co., Ltd., whose plant is in Haicheng, Liaoning, China.
  • Basis of the dataMesh, whiteness, chemistry and moisture figures come from retained production samples and batch inspection records of our own plant. Statements about standards are quoted verbatim in the sources section at the end of this page, each with a link to the issuing body's official page.
  • Updates and correctionsThis article was last updated on . If you find an error in a figure or a statement, write to info@tdhxtrade.com and we will verify and correct the page, updating the date at the top.

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.”

— ISO — International Organization for Standardization, ISO 3262-1:2020, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp