TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636

Chemical Manufacturing

Raw material for producing magnesium chemicals, catalysts, and specialty compounds.

How mineral powders are used here

Raw material for producing magnesium chemicals, catalysts, and specialty compounds.

What we match against

  • High purity
  • consistent chemical composition
  • low impurities

Talk to us

Send us your formulation target and we will propose a grade with a TDS and free sample.

Enquire about this grade

We reply within one business day. Your details are used only to answer this inquiry.

Recommended products

Related reading

Frequently Asked Questions

How is purity defined and verified for chemical manufacturing use?

Purity is only meaningful together with the method and the impurity profile, so we agree the analytical basis before production rather than quoting a single headline figure. Our magnesium range covers MgO 85–99% across caustic calcined, dead burnt and fused grades. Once the specification is agreed in writing it becomes the acceptance basis, and every shipment is issued with a matching technical data sheet and batch COA.

Can you deliver a consistent particle size for reactor charging?

Within a grade we work to keep particle size consistent, and we supply across 10–3000 mesh overall. For reactor charging, the practical question is usually what your downstream process tolerates, so send us the specification you need and we will confirm what we can consistently hold across batches — and if your requirement sits between two grades, we will say so rather than promise it.

What documentation accompanies a first order?

A first order typically goes out with our technical data sheet, the batch COA and the packing list with the agreed net weight and packaging detail, plus HS information for the destination. If your process needs documentation beyond that, such as third-party analysis, tell us before production so it can be arranged rather than attempted after shipment. We also work with third-party inspection at the buyer's request.

Further reading: definitions, comparisons, selection

Other industries

Plastics

Mineral powders serve as functional fillers in plastic manufacturing, improving mechanical strength, dimensional stability, and heat resistance…

View Plastics applications

Paper

Calcium carbonate and talc powders are essential in paper making as fillers and coating pigments, improving paper brightness, opacity, and…

View Paper applications

Rubber

Mineral fillers reinforce rubber compounds, improving tensile strength, tear resistance, and processing characteristics in tire and industrial…

View Rubber applications

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.”

— ISO — International Organization for Standardization, ISO 3262-1:2020, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp