TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636

Rubber

Mineral fillers reinforce rubber compounds, improving tensile strength, tear resistance, and processing characteristics in tire and industrial rubber products.

How mineral powders are used here

Mineral fillers reinforce rubber compounds, improving tensile strength, tear resistance, and processing characteristics in tire and industrial rubber products.

What we match against

  • Fine particle size
  • surface treatment compatibility
  • consistent quality

Talk to us

Send us your formulation target and we will propose a grade with a TDS and free sample.

Enquire about this grade

We reply within one business day. Your details are used only to answer this inquiry.

Recommended products

1250Whiteness ≥ 93

Talc Powder 1250 Mesh

1250 mesh talc powder with stable 30% SiO₂ and ≥93 whiteness. D50 6 µm, D97 ≤12 µm — a fine talc filler for modified plastics, EVA foaming and premium rubber…

View Talc Powder 1250 Mesh

Related reading

Frequently Asked Questions

Does the filler need surface treatment for rubber applications?

It depends on the polymer. Talc and calcium carbonate are commonly used untreated in some compounds and surface-treated in others, and the treatment affects how the filler bonds to the matrix and how the compound behaves during mixing. Rather than guess, tell us the polymer type and your processing conditions, and we will supply both options as samples so you can compare on your own line.

How do you keep filler quality consistent across a large order?

Consistency comes from in-process sampling rather than end-point testing alone. We sample at fixed intervals during the run, check packing weight hourly, and test the key parameters against the relevant technical data sheet before shipment. For large orders we recommend agreeing the sampling plan and the hold criteria in writing before production starts, so what gets held is defined in advance.

What is the lead time for repeat orders of an approved grade?

Once a grade has been approved on your line, repeat orders are usually the shortest lead time we quote, because the specification is already defined and no sample round is needed. Standard lead time is 7–15 days after the specification and packaging artwork are confirmed. Custom or larger orders take longer and are quoted case by case.

Other industries

Plastics

Mineral powders serve as functional fillers in plastic manufacturing, improving mechanical strength, dimensional stability, and heat resistance…

View Plastics applications

Paper

Calcium carbonate and talc powders are essential in paper making as fillers and coating pigments, improving paper brightness, opacity, and…

View Paper applications

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.”

— ISO — International Organization for Standardization, ISO 3262-1:2020, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp