TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636

What is magnesium sulfate heptahydrate?

Magnesium sulfate heptahydrate (MgSO4·7H2O, Epsom salt) is a fully water-soluble Mg+S source (~48.5% MgSO4, 16% MgO) for foliar spray, fertigation, feed and bath salts.

Magnesium sulfate heptahydrate (MgSO4·7H2O), commonly called Epsom salt, is a colourless crystalline salt that dissolves completely in water. With roughly 48.5% magnesium sulfate, about 16% water-soluble MgO and 12–13% sulfur, it is the fastest-acting magnesium source in agriculture and also serves feed, chemical and personal-care markets.

Published · Updated · By TDHX Minerals

Chemistry and typical specification

The seven waters of crystallisation (51% by mass) make the salt fully water-soluble: our grade runs MgSO4 48.59%, water-soluble MgO 16.27%, pH 5–8 in solution, with crystal sizes from 0.1–4 mm plus a 2–4 mm granular cut. Purity of the salt itself is about 99.5% on a dry basis.

Each lot ships with a certificate of analysis; ask for the current TDS for up-to-date lot values.

Where heptahydrate is the right choice

Because it dissolves completely and quickly, it is the default magnesium source for foliar sprays (typically 1–2% solution), drip and sprinkler fertigation, hydroponics and seedling nutrition — correcting Mg deficiency within days rather than weeks. It is also widely used in animal feed, fermentation, textile dyeing, and as bath-salt and spa raw material.

For soil-applied, slow-release magnesium — especially on leaching soils or chloride-sensitive crops — the monohydrate (kieserite) is the more efficient choice.

Packaging and supply

We supply magnesium sulfate heptahydrate in 25/50 kg PP bags and 1000–1250 kg jumbo bags, with OEM and private-label packaging available. Store sealed — the salt is mildly hygroscopic and will cake if left open in humid conditions.

See our magnesium sulfate monohydrate page for the slow-release soil grade.

Why is heptahydrate the standard form for agricultural use?

Because it is a stable, readily crystallised and widely available form that handles well and stores without special conditions. Farmers and formulators are used to working with it, which matters for a material applied by spreading or dissolving. The tradeoff is that it carries more water per unit of magnesium than the monohydrate, so more product is needed to deliver the same magnesium rate. That is a handling and logistics consideration rather than a quality one.

How is it applied, and what should buyers check?

It is applied either as a soluble input or as a broadcast amendment, and what matters commercially is that the material delivers magnesium at the rate you intend. That means agreeing the delivery rate against your soil test rather than copying a rate from another region, since available magnesium and rainfall differ. We can supply the product and the batch COA; the application rate itself is an agronomic decision based on your soil analysis. If you tell us the region and the crop, we can supply a grade for you to trial.

Can you supply to food- or feed-grade requirements?

Those are separate approvals from the industrial grade, governed by the importing country's rules for feed and food inputs. We supply the product with a batch COA and can work with third-party inspection, but we do not present standard magnesium sulphate grades as certified food or feed grade. Tell us the destination market and the intended use, and we will state plainly what documentation can be provided and what would need to be sourced or arranged separately.

Related reading

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document specifies the test methods to be used for magnesium oxide intended for use in the rubber industry as a stabilizer and vulcanizing agent. The choice of the properties to be determined and the values required are subject to agreement between the interested parties.”

— ISO — International Organization for Standardization, ISO 21869:2022, Rubber compounding ingredients — Magnesium oxide — Methods of test, official source

“This document provides guidance on instrument qualification and size distribution measurement of particles in many two-phase systems (e.g. powders, sprays, aerosols, suspensions, emulsions and gas bubbles in liquids) through the analysis of their light-scattering properties.”

— ISO — International Organization for Standardization, ISO 13320:2020, Particle size analysis — Laser diffraction methods, official source

Who is responsible for this page

  • PublisherThis article is published by Dalian Taiding Hengxin International Trade Co., Ltd., the export arm of Haicheng Taiding Huaxin Mineral Products Processing Co., Ltd., whose plant is in Haicheng, Liaoning, China.
  • Basis of the dataMesh, whiteness, chemistry and moisture figures come from retained production samples and batch inspection records of our own plant. Statements about standards are quoted verbatim in the sources section at the end of this page, each with a link to the issuing body's official page.
  • Updates and correctionsThis article was last updated on . If you find an error in a figure or a statement, write to info@tdhxtrade.com and we will verify and correct the page, updating the date at the top.

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp