TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636
Technical insight

Fertilizer Grade Magnesium Sulfate: Which Standard Actually Applies

Fertilizer Grade Magnesium Sulfate: Which Standard Actually Applies

Fertilizer grade magnesium sulfate is not one purity but one evidence packet, and which document defines it decides what the COA may declare. China points to GB/T 26568-2011, the EU to the straight solid inorganic macronutrient category of Regulation (EU) 2019/1009, and most other markets to the contract. This article compares the three, converts MgO, water-soluble MgO and SO3 into each other, explains why 27% MgO and 16% MgO are hydration rather than quality, and lists the five RFQ lines that make two quotations comparable.

“Fertilizer grade magnesium sulfate” sounds like one product with one specification. In practice the phrase travels with at least three different documents, and which one a buyer means decides what the certificate of analysis is allowed to say. A heptahydrate declaring 16.27% water-soluble MgO and a monohydrate declaring 27% total MgO are not two quality levels: they are the same salt carrying different amounts of crystal water, and no standard ranks one above the other. What standards do rank is narrower and more useful — the declared nutrient, the method that establishes it, and the impurities that must stay below a limit. This article sets out where the phrase comes from in China and in the European Union, how the nutrient rows convert into one another, and the five lines that make two quotations comparable.

What “fertilizer grade” actually promises

Start with what it does not promise. It is not a purity figure, and it is not a single global specification. Magnesium sulfate heptahydrate does not become a different chemical when the bag is re-labelled for agriculture; what changes is the evidence packet attached to the lot and the rows an authority will actually test.

  • Agricultural grade — declared nutrient (MgO and, where claimed, sulfur as SO₃), moisture and caking behaviour, crystal or granule size for the spreader or the fertigation line, and the heavy-metal limits the destination market's fertilizer rules impose.
  • Feed grade — the same salt on a different panel: arsenic, lead, cadmium, mercury and fluoride, because the route of exposure is an animal rather than a field.
  • Industrial grade — insoluble matter, chloride, iron and appearance, because the salt is going into a dyebath, a paper furnish or a water-treatment tank rather than a soil.
  • Food grade — a food-additive monograph or a pharmacopoeia, which is where a document such as the Chinese food-additive standard GB 29207 sits.

The practical consequence: one production line can genuinely serve agricultural, industrial, feed and food buyers, while the certificate behind each shipment is a different document. So when an RFQ arrives saying only “fertilizer grade”, the most useful first reply is a question — which market, and which document does your registration ask for? Product background is on the monohydrate guide page, and the salt itself comes in the two forms compared below.

The document behind the phrase: three cases

China — GB/T 26568-2011

China answers the question with a product standard rather than a regulation: GB/T 26568-2011, Magnesium sulfate for agricultural use. Its scope is narrow and practical — it specifies the requirements, test methods, inspection rules, marking, packaging, transport and storage for agricultural magnesium sulfate, and it applies to that product. Because it is a recommended standard (GB/T) rather than a mandatory one, it functions as the reference a Chinese producer and a Chinese buyer will both quote, and as the document a COA can be written against; it is not a market licence.

Two consequences for an importer. First, the limit table is the standard: ask which clause each COA row is written against, instead of accepting “meets GB/T 26568” as a specification. Second, the heavy-metal side of an agricultural product is normally handled by the fertilizer ecological-index standards — the GB/T 23349 series covers arsenic, cadmium, lead, chromium and mercury — rather than by the product standard alone. A supplier who cannot name the document that supplies the arsenic limit has not finished the answer.

European Union — PFC 1(C)(I)(a)(i) and the CE mark

The EU does not publish a magnesium sulfate standard either. It publishes a regulation for fertilising products, (EU) 2019/1009, and a product earns access to the market by fitting a product function category, being made only from permitted component materials, and meeting the contaminant limits in the annexes.

For a straight magnesium sulfate the relevant category is the straight solid inorganic macronutrient fertiliser, PFC 1(C)(I)(a)(i). The category is defined by what is declared, not by what is in the bag: a product may declare only one macronutrient, or one primary macronutrient plus one or more secondary ones. Magnesium and sulfur count as secondary macronutrients here, which is why the declaration is written as MgO and SO₃ and not as “MgSO₄·7H₂O”.

The annex also sets a floor. Where only one macronutrient is declared, total magnesium oxide must be at least 5% by mass and total sulfur trioxide at least 10% by mass; that paragraph is quoted verbatim at the end of this article. Our monohydrate grades declare 27% total MgO and 16–20% sulfur, so the floor is not the binding constraint — the paperwork is: CE marking, the Annex III declaration, and the contaminant ceilings that apply to every inorganic macronutrient fertiliser regardless of nutrient content (cadmium, hexavalent chromium, mercury, nickel, lead, arsenic, biuret and perchlorate, each with its own limit). Those are the rows a European buyer will test even when the MgO figure looks perfect.

Everywhere else — the contract becomes the standard

Most other markets issue no “fertilizer grade” certificate at all. Registration is handled by a national authority or, in the United States, by state departments of agriculture, and what is asked for is a label declaration supported by data; the technical content of the purchase is left to the contract. In those markets the specification you sign is the standard, and it is worth exactly as much as the test methods written into it.

One nutrient, four ways to write it

A single tonne of salt can be described as MgSO₄·7H₂O, as Mg, as MgO or as water-soluble MgO, and the four numbers look nothing like each other. None of them needs a new measurement to convert to the next — the ratios are fixed by atomic masses. Magnesium oxide is about 60% magnesium by mass, and sulfur trioxide about 40% sulfur, so a figure declared as MgO can be restated as Mg without touching the sample.

Hydration is the second trap. The theoretical ceiling for MgO is about 16.3% by mass in MgSO₄·7H₂O and about 29% in MgSO₄·H₂O. That single fact explains why our heptahydrate declares 16.27% water-soluble MgO while the monohydrate declares 27% total MgO: the heptahydrate figure is essentially the whole theoretical content, which is what a 99.5% purity looks like when it is expressed as MgO. A 27% number is not “65% stronger” than a 16% number — most of the gap is water that will never reach the crop.

  • State the basis. Total or water-soluble, as MgO or as Mg — three different numbers for the same bag.
  • State the hydrate. Heptahydrate, monohydrate, or either, with a nutrient floor that both forms can meet.
  • State the method. A declared nutrient needs a method name; without one the number cannot be reproduced in a second laboratory.

The same logic applies to sulfur: 16% S and 40% SO₃ can be the same material, and a buyer comparing them across two quotations is comparing units, not products.

Monohydrate or heptahydrate: the standard will not choose for you

Both forms can be fertilizer grade; the standard looks at the declared nutrient, while the field looks at handling. The choice is about water, freight and equipment, not about quality.

  • Heptahydrate — crystals at 0.1–4 mm and 2–4 mm, dissolves quickly and completely, the natural fit for fertigation, foliar sprays and liquid blends. Crystal water is roughly half its mass, so you pay freight for water and need sealed packing in humid stores. See the heptahydrate guide.
  • Monohydrate — powder or granule, 27% total MgO, far less water, better storage stability and no caking in a humid warehouse, the natural fit for base fertilizer, bulk blends and mechanical spreading.

For a decision framework by application see the heptahydrate versus monohydrate comparison; for the cost arithmetic, what a price per tonne actually sells.

The rows that decide acceptance, beyond MgO

A COA that lists only MgO is a marketing document. The rows below are where lots are actually accepted or rejected — pick the ones your process uses, and write tolerances for those.

  1. Water and caking — free moisture is a defect; crystal water is not. The heptahydrate's 48% loss on ignition (accepted range 40.0–52.0%) is crystal water leaving the crucible, and reading it as “moisture” would condemn a perfectly good lot.
  2. Crystal or granule size distribution — what the spreader, the blender or the drip line can take. A mean size without a distribution hides the fines that block emitters.
  3. pH of the solution — a property of the product at a stated concentration. Our grades are specified at pH 5–8; the number is useful for comparing lots and useless as a statement about your soil.
  4. Chloride and insoluble matter — the rows that matter in a fertigation line with sensitive crops, or in a liquid blend that has to stay clear.
  5. Heavy metals — to the limits of the destination market's fertilizer rules, not to the limits of a food monograph borrowed for convenience.

Agree with your agronomist which of these are acceptance criteria and which are only monitoring rows. A specification that rejects a lot on a row nobody uses costs money without buying quality.

A soil test is not a product certificate

Buyers sometimes send a soil report and ask for “a pH that matches our soil”. These are two different measurements that do not convert. Soil pH is determined on a soil suspension: ISO 10390, for example, specifies a 1:5 suspension — and the medium, water or potassium chloride or calcium chloride, changes the reading by itself. Product pH is measured on a solution of the salt at a stated concentration. Neither number predicts the other, and a COA that mixes them up will not survive a technical audit.

Magnesium sulfate is a neutral salt. It delivers magnesium and sulfur; it does not correct an acid soil the way a carbonate does. If the field problem is acidity rather than magnesium, the material is dolomite lime, not Epsom salt — this article explains the difference. Keeping the two claims apart protects you twice: an agronomic recommendation that holds up, and a COA that says only what was measured.

The five lines that make two quotations comparable

Most quotation confusion is not about price. It is that two suppliers answered two different questions. Five lines close the gap.

  • Form and grade — heptahydrate or monohydrate, powder or granule, size range if granule.
  • Declared nutrient and basis — for example “water-soluble MgO ≥ 20%, sulfur ≥ 16%, both on a dry basis”, with the hydrate named.
  • Method — the standard each row is tested to, so two laboratories can disagree numerically but not definitionally.
  • Packaging and quantity — 25 kg or 50 kg bags, 1000 kg or 1250 kg jumbo bags, and tonnes per 20 ft container.
  • Documents — batch COA with method names, TDS revision, and whether third-party inspection is required.

Send those five lines and a quotation becomes a comparison. Send “fertilizer grade” and you will collect prices for three different products. If you would rather start from published grades, the monohydrate product page and the heptahydrate product page carry them in full, and this guide shows how an application becomes a grade.

From sample to container: how the document gets tested

A specification is only proven where a second laboratory reads the same numbers. The route we use with new buyers is short: a free 0.5–1 kg sample for your own analysis, a comparison of your result against the batch COA before the order, a trial quantity if the salt goes into a blend, then the container with a sealed retained sample and a batch COA per lot. Third-party inspection can be added where the value of the consignment justifies it.

Our published grades: monohydrate at 27% total MgO, water-soluble MgO of 20%, 23% or 25% by grade, sulfur of 16%, 18% or 20%, pH 5–8, in powder or granule; heptahydrate in 0.1–4 mm and 2–4 mm crystals with 16.27% water-soluble MgO and pH 5–8. Every lot ships with a TDS and a batch COA, and the fertilizer-standard rows your registration asks for can be added to the COA for the same lot. Start from the agriculture and feed page, or send your target specification through the contact form.

Frequently Asked Questions

Is "fertilizer grade" the same thing as "agricultural grade"?

In trade the two are used interchangeably, and neither names a purity. What separates them is the document behind the word: agricultural grade usually points to a product standard such as GB/T 26568-2011, while fertilizer grade is often shorthand for "fit for a fertilizer registration in my market". Ask for the standard and the declared rows rather than accepting the adjective — the adjective will not tell you which arsenic limit applies or who set it.

Can a food-grade certificate be reused for a fertilizer registration?

Not on its own. A food-additive monograph is a demanding document, but it declares the substance and its purity limits, not the nutrient content in fertilizer terms — total and water-soluble MgO, sulfur as SO3. Our heptahydrate is certified against GB 29207 for feed and food chains; for a fertilizer registration we issue the fertilizer rows on the same lot and the same sampling, and state which document each row comes from.

Does a higher MgO number always mean a better buy?

No — above the theoretical ceiling of each hydrate the number cannot rise at all. Heptahydrate tops out near 16.3% MgO and monohydrate near 29%, so 27% against 16% mostly measures water, not quality. Compare the cost per unit of delivered nutrient on one basis (total or water-soluble, MgO or Mg), and add the freight you are paying for crystal water.

Related articles

Who is responsible for this page

  • PublisherThis article is published by Dalian Taiding Hengxin International Trade Co., Ltd., the export arm of Haicheng Taiding Huaxin Mineral Products Processing Co., Ltd., whose plant is in Haicheng, Liaoning, China.
  • Basis of the dataMesh, whiteness, chemistry and moisture figures come from retained production samples and batch inspection records of our own plant. Statements about standards are quoted verbatim in the sources section at the end of this page, each with a link to the issuing body's official page.
  • Updates and correctionsThis article was last updated on . If you find an error in a figure or a statement, write to info@tdhxtrade.com and we will verify and correct the page, updating the date at the top.

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“Where a straight solid inorganic macronutrient fertiliser contains only one declared macronutrient (nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), sodium (Na), sulphur (S)), that macronutrient content shall be at least the following: (a) 10 % by mass of total nitrogen (N), (b) 12 % by mass of total phosphorus pentoxide (P2O5), (c) 6 % by mass of total potassium oxide (K2O), (d) 5 % by mass of total magnesium oxide (MgO), (e) 12 % by mass of total calcium oxide (CaO), (f) 10 % by mass of total sulphur trioxide (SO3), or (g) 1 % by mass of total sodium oxide (Na2O).”

— European Parliament and Council of the European Union, Regulation (EU) 2019/1009, Annex I, Part II, PFC 1(C)(I)(a)(i) — Straight solid inorganic macronutrient fertiliser, official source

“This document specifies an instrumental method for the routine determination of pH within the range pH 2 to pH 12 using a glass electrode in a 1:5 (volume fraction) suspension of soil, sludge and treated biowaste in either water (pH in H2O), in 1 mol/l potassium chloride solution (pH in KCl) or in 0,01 mol/l calcium chloride solution (pH in CaCl2).”

— ISO — International Organization for Standardization, ISO 10390:2021, Soil, treated biowaste and sludge — Determination of pH, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp