TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636
Technical insight

Magnesium Sulfate Heptahydrate vs Monohydrate: How to Choose

Magnesium Sulfate Heptahydrate vs Monohydrate: How to Choose

Heptahydrate and monohydrate magnesium sulfate are the same salt with a different amount of water of crystallization, and that one difference decides the buying choice. The heptahydrate (Epsom salt) carries close to half its mass as crystal water, dissolves fast and suits foliar spray, fertigation and feed dissolution; the monohydrate (kieserite) carries roughly twice the magnesium per tonne, stores better and suits base fertilizer and bulk blends. This article compares the two forms by application, then by specification, and closes with the five lines an RFQ should state.

Ask three suppliers for “magnesium sulphate” and you may receive three different things: transparent crystals, a free-flowing white powder, or a hard granule that looks like a prilled fertilizer. All of them are magnesium sulfate. What separates them is water of crystallization — the water locked inside the crystal itself. The heptahydrate, MgSO₄·7H₂O, better known as Epsom salt, carries seven water molecules per magnesium sulfate unit; the monohydrate, MgSO₄·H₂O, sold in the trade as kieserite, carries one. That single line in the formula drives nearly every practical buying decision: how much magnesium actually arrives per tonne, how fast it dissolves, how it behaves in a humid warehouse, and which application it fits. This article compares the two forms the way a purchase decision actually runs — application first, then specification, then logistics.

One salt, two forms: what the hydrate number means

Magnesium sulfate is a fully water-soluble salt in every commercial form. The hydrate number is not a purity grade and not a quality level — it describes how much water of crystallization is bound into the lattice. Bound water is part of the compound, not free moisture sitting on the surface, and it cannot be washed or dried off without turning the product into something else.

  • Magnesium sulfate heptahydrate (MgSO₄·7H₂O, Epsom salt) — colorless transparent crystals or white granular material, sold in crystal sizes such as 0.1–4 mm and 2–4 mm. The classic form for anything that is dissolved before use. See our magnesium sulfate heptahydrate product page.
  • Magnesium sulfate monohydrate (MgSO₄·H₂O, kieserite) — a powder or hard granule with substantially more magnesium and far less water per tonne, made for dry spreading, blending and field programmes. See our magnesium sulfate monohydrate (kieserite) product page.

How much of a heptahydrate is water? Our own datasheet answers it with the loss-on-ignition line: 48%, with an acceptance window of 40.0–52.0%. When a lab ignites a heptahydrate sample, the mass that leaves the crucible is crystal water — close to half the bag. The background of both products, and how each is made, is covered in our guides to what magnesium sulfate heptahydrate is and what magnesium sulfate monohydrate is.

What the difference means per tonne

Because nearly half the mass of the heptahydrate is crystal water, the monohydrate delivers roughly twice the magnesium oxide per tonne of finished product. That is the single most consequential number in the comparison, and it is also where most quotations go wrong: a per-tonne price for the two forms is a comparison of two different units. The honest way to compare offers is to convert every quotation to cost per unit of water-soluble MgO delivered to your gate — product price plus freight, divided by the water-soluble MgO content stated on the COA. Freight sharpens the point, because with the heptahydrate you are also paying ocean freight on water.

Our published heptahydrate datasheet lists the assay as MgSO₄·7H₂O at 99.34% and water-soluble MgO at 16.27%, with a solution pH of 6.7 at 50 g/L and heavy metals controlled for feed and food use. Whichever supplier you buy from, insist that the magnesium figure on the COA states its basis — as the hydrate, as MgSO₄, or as water-soluble MgO — because the same material described on three different bases will look like three different products.

Dissolution: speed matters in some systems, not in others

The heptahydrate dissolves quickly and completely in water at ambient temperature — that is what it is made for. Our heptahydrate is specified to dissolve without precipitation or residue, which is why it is the form used for clear solutions. The monohydrate dissolves more slowly, and that is not a defect: in a soil application both forms end up as the same magnesium and sulfate ions, so a broadcast-and-incorporate base dressing never notices the difference in rate.

The practical rule: match the form to the delivery system, not to a general idea of quality. Where the product must be dissolved — spray tanks, fertigation, feed dissolution, process solutions — dissolution speed is a real specification. Where the product goes onto or into soil in solid form, dissolution speed is irrelevant and the per-tonne magnesium content wins instead.

Choosing by application

Foliar, fertigation and feed

Anything that passes through a tank, a line or a drinking-water system wants the heptahydrate. Foliar spraying and drip irrigation need a solution with no residue to clog emitters; feed and food applications need the heavy-metal profile and the solution pH stated on the COA — our heptahydrate is supplied in industrial, agricultural, feed and food grades, with the food grade produced against GB 29207-2012. The agricultural context, and where magnesium sulfate sits among other water-soluble nutrients, is described on our agriculture and feed applications page.

Base fertilizer, bulk blends and field programmes

For soil-applied magnesium at field scale, the monohydrate is the working choice: more magnesium per tonne, a granule that handles mechanical spreading and mixes with other granular fertilizers in a blend, and better stability in storage. Our monohydrate is produced by purification, crystallization and drying, supplied as powder or granule, and — as our product description puts it — it does not change the original pH of the soil it is applied to. It serves as base fertilizer and top dressing.

Industrial raw materials

In chemical manufacturing the two forms solve different problems: where a process needs a clear magnesium sulfate liquor, the heptahydrate goes into the dissolving step; where a dry formulation or a solid reaction mix needs magnesium, the monohydrate avoids paying for water that would only be driven off again. Which one fits depends on your process, and the honest answer is usually a trial — the background is on our chemical manufacturing applications page.

Storage, caking and shipping

The crystal water that defines the heptahydrate is also its handling story. In dry heat the crystal can give up part of its water (efflorescence); in humid conditions it can take water on and cake. Neither means the product is off-spec — but both change how the material flows through your plant, so the packing and the container matter. Standard export packing for both forms is 25/50 kg bags or 1000/1250 kg jumbo bags; the options are set out on our packaging page. For the heptahydrate we treat container discipline as part of the product: dry container, palletized and wrapped, and no long dwell time in hot transshipment yards. The monohydrate, with its lower water content, is more forgiving in humid climates — one of the reasons it dominates bulk field programmes in the tropics.

The specification checklist for your RFQ

Whichever form you buy, five lines in the enquiry prevent most of the trouble:

  • Hydrate form and formula — MgSO₄·7H₂O or MgSO₄·H₂O, written out. Do not accept “magnesium sulphate” as a line item.
  • Magnesium basis — which figure you expect on the COA: assay as the hydrate, as MgSO₄, or as water-soluble MgO.
  • Physical form and size — crystal at 0.1–4 mm or 2–4 mm for the heptahydrate; powder or granule for the monohydrate, with the granule size window stated if the material must blend with other granules.
  • Water, ignition and insolubles — the loss-on-ignition window, free moisture and water-insoluble matter, because caking and residues start there.
  • Impurity limits that match the end use — heavy metals and pH for feed, food and foliar use; looser for base fertilizer. Our general method for reading a mineral powder grade is in how to choose a mineral powder grade.

Mistakes we see most often

  • Comparing per-tonne prices across the two forms. Always convert to cost per unit of water-soluble MgO delivered.
  • Ordering a crystal where a granule is needed. Soft crystals segregate and dust in a bulk blend; the blend you spread in April is not the blend you loaded in March.
  • Assuming dissolution figures transfer. Water temperature and hardness change dissolution behaviour; test with your own water and your own tank times.
  • Treating storage as free. A heptahydrate stored through a humid summer in single-layer bags will cake; the packing question belongs in the RFQ, not after the first complaint.

If you are deciding between the two forms for a specific crop, feed ration or process, send us the application and the delivery system — we will propose the form, the grade and the packing, and support it with a sample and a COA before you commit to a container. The two product pages above list the current grades; the two guides are the shorter chemistry read.

Frequently Asked Questions

Which form should I use for drip irrigation — heptahydrate or monohydrate?

The heptahydrate. Drip lines need a solution with no undissolved residue, and the heptahydrate is the fast, fully dissolving form — our crystals are specified to dissolve without precipitation, which is what keeps emitters clean. The monohydrate dissolves more slowly and is intended for soil-applied programmes; in a drip tank it risks leaving sediment before it has finished dissolving. If your programme uses both, dissolve the heptahydrate in the tank and apply the monohydrate as base or top dressing.

Can monohydrate kieserite be blended with other granular fertilizers?

Yes — that is one of its main roles. It is supplied as a hard granule precisely so it can be dry-blended with other granular materials without segregation. What to confirm with the supplier is the granule size window relative to the other blend components, because a size mismatch is what makes a blend separate in the bag and in the spreader. State the blend partners when you enquire and we will match the granule fraction.

How do I compare a heptahydrate offer and a monohydrate offer fairly?

Convert both to cost per unit of water-soluble MgO delivered to your site: product price plus freight, divided by the water-soluble MgO content on the COA, with the basis (as MgSO₄·7H₂O, as MgSO₄ or as MgO) stated. A per-tonne comparison across the two forms is misleading, because nearly half the mass of the heptahydrate is crystal water — the product that looks cheaper per tonne can be dearer per unit of magnesium.

Related articles

Who is responsible for this page

  • PublisherThis article is published by Dalian Taiding Hengxin International Trade Co., Ltd., the export arm of Haicheng Taiding Huaxin Mineral Products Processing Co., Ltd., whose plant is in Haicheng, Liaoning, China.
  • Basis of the dataMesh, whiteness, chemistry and moisture figures come from retained production samples and batch inspection records of our own plant. Statements about standards are quoted verbatim in the sources section at the end of this page, each with a link to the issuing body's official page.
  • Updates and correctionsThis article was last updated on . If you find an error in a figure or a statement, write to info@tdhxtrade.com and we will verify and correct the page, updating the date at the top.

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document specifies the test methods to be used for magnesium oxide intended for use in the rubber industry as a stabilizer and vulcanizing agent. The choice of the properties to be determined and the values required are subject to agreement between the interested parties.”

— ISO — International Organization for Standardization, ISO 21869:2022, Rubber compounding ingredients — Magnesium oxide — Methods of test, official source

“This document provides guidance on instrument qualification and size distribution measurement of particles in many two-phase systems (e.g. powders, sprays, aerosols, suspensions, emulsions and gas bubbles in liquids) through the analysis of their light-scattering properties.”

— ISO — International Organization for Standardization, ISO 13320:2020, Particle size analysis — Laser diffraction methods, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp