
Magnesium sulfate enters the tariff at 2833.21, but the heading alone does not settle a shipment: the same trade name can fall under 2530.20 when the sulfate is a mined mineral, hydrate forms share one six-digit line, and the entry survives review only when the documents agree.
Almost every magnesium sulfate enquiry we answer ends with the same line: “HS code 2833.21, correct?” For the material we ship — magnesium sulfate heptahydrate and monohydrate, both produced by purification and crystallisation — the six-digit entry is right. But the code is a conclusion, not an input. The same trade name can sit in a different heading depending on whether the sulfate is a mined mineral or a manufactured salt, and the hydrate written on the certificate is a separate question from the tariff line.
This page sets out what 2833.21 actually covers, where the neighbouring heading 2530.20 takes the goods instead, and what a broker needs to see before the entry is filed — so that the code on your invoice survives the first review at destination.
What heading 2833 covers, and what 2833.21 pins down
Heading 2833 is the tariff home of the sulfates as a chemical class; the schedule text reads “Sulfates; alums; peroxosulfates (persulfates)”. Inside it, subheadings separate the sulfates by the metal they carry, and 2833.21 is the magnesium line — two words in the schedule: “Of magnesium”. Our own magnesium range sits under this heading, from dead-burnt and fused magnesia to the two sulfate hydrates (magnesium product range).
Two consequences follow from that structure, and both are commercial.
The chemistry decides the line, not the end use
A sulfate is classified by what the salt is, not by what the buyer does with it. The same magnesium sulfate sold as a foliar fertiliser, as a feed additive, as a textile weighting agent or as a raw material for magnesium salt synthesis is one compound; the agricultural end use does not by itself move the goods into a fertiliser chapter. If your destination also regulates the product as a fertiliser — registration, labelling, nutrient declaration — that is a parallel obligation stacked on top of the tariff code, not a substitute for it. Buyers sourcing for agriculture usually meet both requirements on the same shipment (agriculture and feed applications).
The sixth digit is the only part everyone shares
Six digits is where international agreement stops. Every schedule we checked carries 2833.21 at that level; below it, each administration adds its own digits for statistics and duty, and those national tails change far more often than the six-digit stem. A Chinese export declaration, a US entry and an EU import declaration can therefore all read “2833.21” while differing at digit eight or ten. Write the six-digit code into the sales contract and let the destination broker fix the tail; put the full national line into the contract only when your buyer has already confirmed it in writing.
The natural-versus-manufactured split: heading 2530.20
This is where most mis-declarations begin. The tariff does not treat all magnesium sulfate as one thing. Heading 2530 covers mineral substances not elsewhere specified, and its subheading 2530.20 is written for “Kieserite, epsom salts (natural magnesium sulfates)”. The operative word is natural. Goods whose magnesium sulfate is a mined, mechanically processed mineral belong there; goods where the salt has been made — dissolved, purified, crystallised, dried — belong in 2833.21 as a separate chemically defined compound.
Our own monohydrate is the case in point. In the trade it is called kieserite, because that is the mineral name buyers know, and the name is useful in a technical conversation. But the product is made by purification, crystallisation and drying, so the trade name does not drag it into 2530.20 (magnesium sulfate monohydrate). An invoice that says “kieserite” and nothing about how it was made is exactly the ambiguity that produces a classification question at the port.
Why the trade name is the weakest evidence you can give
A broker’s file is built from documents, and a trade name is the one item in it with no document behind it. Epsom salt, kieserite, bitter salt, epsomite — each of those names can legitimately describe material arriving under either heading, depending on origin and processing. If the description on the invoice is only a trade name, the broker has to guess, and the guess is made against your goods. The fix is cheap: give the chemical name and the hydrate, add the process route in one clause (“synthetic, produced by crystallisation”), and attach the specification sheet.
Heptahydrate, monohydrate, anhydrous: one line or three?
At six digits, one. In the US and UK schedules we checked, 2833.21 carries a single line with no split by water of crystallisation: the heptahydrate (MgSO₄·7H₂O), the monohydrate (MgSO₄·H₂O) and the anhydrous salt are the same compound at different hydration, and the tariff follows the compound. National statistical suffixes can and do change, so if a buyer’s broker insists on a specific national line for a specific hydrate, treat it as a tail question rather than a six-digit one.
What does change with the hydrate is the commercial arithmetic — which is why the two questions get confused:
- How much of the weight is water. In the heptahydrate, roughly half of the shipped mass is water of crystallisation. You pay freight on it, and it disappears the moment the material is dissolved or dried.
- Nutrient density per tonne. Our monohydrate grades are specified at total MgO ≥27% with water-soluble MgO from 20% to 25% by grade; the heptahydrate is specified at water-soluble MgO 16.27%. Per tonne of product the monohydrate carries more magnesium; per tonne of magnesium, a price comparison can invert.
- Behaviour in store. Of the two, the heptahydrate is the more soluble and the more hygroscopic; the monohydrate is the form that travels better through humid ports.
The hydrate comparison covers the agronomic choice. The point here is narrower: whichever hydrate you buy, the six-digit code does not move, so this is a specification decision, not a tariff one. The two product pages state what each form is specified at (heptahydrate, monohydrate).
What a broker actually asks for
Classification questions are almost always documentation questions. Before the entry is filed, expect these seven items to be requested:
- Name and hydrate, written as a chemical formula as well as a name — “magnesium sulfate heptahydrate, MgSO₄·7H₂O” rather than “Epsom salt”.
- Analysis of total MgO, water-soluble MgO and sulfur, with the test basis those figures come from.
- pH of the solution, plus the physical form (crystal, granule, powder) with its size range.
- How it was made — mined and ground, or dissolved and crystallised. This single line decides between 2530.20 and 2833.21 far more often than any other item on the list.
- Packing: 25 kg bag or 1000/1250 kg jumbo bag, and the net weight per package.
- End use in one line, and whatever the destination adds on top if it regulates fertilisers or feed.
- Specification sheet and batch certificate matching the shipment, not a generic brochure.
Send those seven with the quotation and the classification conversation usually ends in one reply. Send a trade name only, and it has just started. Where the goods are already covered in our files, the magnesium oxide entry under 2519.90 shows how the same exercise runs for the oxide side of the range.
Where the code stops being useful
Three places where a correct 2833.21 still will not answer the question being asked:
- Trade statistics. Every magnesium sulfate collapses into one statistical line — fertiliser grade, feed grade, industrial crystal, anhydrous. An average import price computed from that line compares hydrates, grades and packings against each other, so it is a check on direction, never a price benchmark.
- Origin and preferential duty. Whether goods qualify under a trade agreement is decided by origin rules and the evidence behind them, not by the heading. A correct code with a weak origin declaration still fails.
- Trade remedies. A measure’s scope is written in its own product description — magnesium content, form, end use — and that description can be narrower or broader than a heading. Reading the code is not reading the scope.
How to lock the classification down
If the volume justifies it, buy certainty. Most administrations issue advance rulings — binding tariff information in the EU, a ruling from customs in the US — on the basis of a sample, a specification and a process description. A ruling binds only the applicant, but it is worth having when the goods are new to that market or when an earlier shipment has been queried.
Below that threshold, the practical version is a file that can prove itself: chemical name, hydrate, process route, specification, and one consistent description across invoice, packing list, certificate of analysis and bill of lading. Inconsistency between those four documents is what turns a correct code into an inspection.
If you are weighing heptahydrate against monohydrate for a particular market, send the destination, the end use and the packing you need. We will confirm what the current production can commit to per batch, and quote on that basis rather than on a brochure figure.


