TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636

What is dolomite powder?

Dolomite powder is calcium magnesium carbonate (CaMg(CO3)2), the only common mineral that delivers both CaO and MgO in one feedstock. Learn its specs (CaO 27–35%, MgO 22–30%) and where it is specified.

Dolomite is calcium magnesium carbonate, CaMg(CO3)2. Its defining feature is that it carries both calcium and magnesium in one mineral — which is why glassmakers and refractory formulators reach for it instead of blending limestone with magnesia.

Published · Updated · By TDHX Minerals

Composition and specs

Our dolomite standard TDHX-Dolomite-2025-08 specifies CaO 27–35%, MgO 22–30%, SiO2 ≤8%, Fe2O3 ≤0.5% and whiteness 80–95%, across 200 to 2000 mesh.

The combined CaO + MgO is what makes it functionally different from limestone (calcium carbonate) in the applications below.

Where it is specified

In glass and ceramics, dolomite supplies both fluxes in one feedstock. In coatings and plastics it is a bright, hard functional filler. In construction and environmental work it is used for mortar, concrete and flue gas desulphurisation.

Specify by CaO/MgO, whiteness, fineness and application; we will match the grade.

What is dolomite powder used for?

Dolomite is a calcium magnesium carbonate, and it is used where both the calcium and the magnesium matter. The classic application is soil pH correction, where the Ca–Mg double role is the point rather than an accident. It is also used as a filler and as a refractory and ceramic raw material. Our dolomite grades run CaO 27–35% and MgO 22–30% with whiteness 80–95, which is the range that makes the material usable for both filler and soil applications. The specific use determines which of these numbers governs.

How is dolomite different from limestone?

The difference is chemistry, and it decides the application. Limestone is predominantly calcium carbonate, while dolomite is a calcium magnesium carbonate with a substantial magnesium component. For a filler where only volume and colour matter, the two can sometimes substitute. For soil pH correction or for refractory and ceramic work, the magnesium content is the reason dolomite is chosen and it cannot be substituted. We supply dolomite to the CaO and MgO ranges above, and the COA documents the actual values for each batch.

Can you supply dolomite powder in bulk for soil application?

Yes, and soil application is one of the cases where consistent chemistry matters more than fine specification. Our dolomite grades are produced and classified on a 200–2000 mesh range, and the standard MOQ is one 20 ft container at roughly 25–27 tonnes depending on grade and packaging. If you are supplying agricultural customers, we can also discuss retail-sized packaging. Tell us the destination market and whether you need documentation for agricultural use, and we will be explicit about what is available.

Related reading

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.”

— ISO — International Organization for Standardization, ISO 3262-1:2020, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Who is responsible for this page

  • PublisherThis article is published by Dalian Taiding Hengxin International Trade Co., Ltd., the export arm of Haicheng Taiding Huaxin Mineral Products Processing Co., Ltd., whose plant is in Haicheng, Liaoning, China.
  • Basis of the dataMesh, whiteness, chemistry and moisture figures come from retained production samples and batch inspection records of our own plant. Statements about standards are quoted verbatim in the sources section at the end of this page, each with a link to the issuing body's official page.
  • Updates and correctionsThis article was last updated on . If you find an error in a figure or a statement, write to info@tdhxtrade.com and we will verify and correct the page, updating the date at the top.

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp