TDHX Minerals · Dalian Taiding Hengxin International Trade Co., Ltd.info@tdhxtrade.com  |  Call / WhatsApp +86 18142387636
Technical insight

Pebbles MOQ: How Many Containers Do You Need?

Pebbles MOQ: How Many Containers Do You Need?

Pebbles MOQ is set per colour and grading, not per tonne: every combination is screened and hand-sorted as a separate item, and export orders typically start at one 20 ft container per combination. This article explains why, how packing changes what a container delivers, and what to write in your first RFQ.

Buyers sourcing decorative pebbles from China usually arrive at the minimum-order question right after colour and size. For pebbles the answer is shaped by how the product is actually made: stones are colour-sorted, graded and polished, and every colour-and-grading combination is produced as a separate item. That is why landscaping pebbles are normally quoted from one 20 ft container per colour and grading, rather than from a tonnage figure.

Why pebbles are not ordered per tonne

Powdered minerals come off a mill continuously, so a tonnage-based MOQ makes sense for them. Pebbles do not work that way. Each colour line — white, red, green and wood brown — is hand-selected at the raw-stone stage before polishing, and each grading, from 3–5 mm up to 60–90 mm, is screened separately. Two consequences follow:

  • Every colour-and-grading combination is its own production run, with its own screening and hand-sorting work behind it.
  • Colour consistency between containers, not tonnage, is the specification that decides whether the delivered stone matches the approved sample.

For an export order the sensible minimum is therefore one 20 ft container per colour and grading. Splitting one container across many combinations multiplies screening runs and hand-sorting hours without reducing the real cost of the order.

How fast the colour-and-grading matrix multiplies

Four colour lines, a ladder of gradings

There are four pebble colour lines: white, red, green and wood brown, with gradings from 3–5 mm to 60–90 mm. A buyer asking for three colours in three gradings is really ordering nine separate items — nine screening runs, nine sets of bags and markings, nine points where colour can drift from the approved sample.

Fewer combinations, tighter consistency

The efficient way to structure a first order is to shrink the matrix deliberately. Pick the one or two gradings the project truly needs — our pebble size guide maps gradings to uses — and add further combinations in later containers once the first delivery is approved on site.

What one container of pebbles delivers

The MOQ is one container, but what fills it depends on the packing format:

  • 20/25 kg bags — the retail-friendly format; bag printing can be OEM-produced for distributors and garden-centre chains.
  • 1,000 kg jumbo bags — for landscape contractors spreading stone by machine.
  • Pallets — bagged pebbles palletized and wrapped for cleaner stacking and faster unloading.

Bagged stone cubes out in a container, so the load is limited by volume rather than by weight. That is another reason pebble quotations are built around the container instead of around a tonnage figure.

Reaching container economics on a small project

If a project cannot consume a full container of one combination, three approaches work better than chasing a small MOQ:

  • Consolidate the project. Order the gradings the whole landscape needs — a pathway grading here, a pot-topping grading there — across successive containers rather than half-containers of many SKUs.
  • Use custom mixed gradings. A blended colour mix or a project-specific grading band can be produced to order, provided the mix is written into the specification.
  • Plan repeat business. Distributors supplying garden centres or hardware chains can schedule repeat containers of the approved combination; consistency is easier to hold when the same grading runs again.

By contrast, the same question for a milled product has a different answer — dolomite powder MOQ is driven by container weight economics, because powder loads a container to its weight limit.

Sample first, then book

The order path that works for decorative stone:

  • Request a sample bag by courier and compare it against the project, in daylight and in place.
  • Agree the written specification: colour line, grading range, packing format and bag marking.
  • Book the first container and keep a retained sample on both sides.
  • Check every repeat container against the retained sample before release.

The same discipline applies to powders, as described in our sample approval workflow; with pebbles the stakes are higher still, because colour is the product.

What to put in your pebbles RFQ

A complete first enquiry shortens the quotation cycle considerably. Include:

  • Colour line — white, red, green or wood brown.
  • Grading or grading band, for example 8–15 mm.
  • Packing: 20/25 kg bags, jumbo bags or pallets, and whether OEM printing is required.
  • Application, since it drives the grading choice — see landscaping and garden uses and how to lay decorative pebbles.
  • Destination port and planned annual volume.

With those details, a supplier can confirm the achievable specification and a realistic container plan in the first reply.

Consistency is the real specification

Because raw stone is hand-selected before polishing, colour can vary slightly from one quarry lot to the next. The way to hold a landscape project together is to agree in writing how colour will be judged — normally against a retained sample — and to check each container against it. The sorting and hand-selection work behind every combination exists precisely to protect that consistency, and it is the honest reason the MOQ is set per colour and grading rather than per tonne.

Lead time and next steps

Once the specification and sample are approved, standard lead time is 7–15 days from booking, with shipment through Dalian or Yingkou ports. Send the colour, grading and packing details with your first enquiry and we will come back with a container plan built around the combinations your project actually needs.

Frequently Asked Questions

Can I mix two pebble colours or gradings in one container?

Yes, but not as loose cargo. Each colour-and-grading combination is screened and hand-sorted separately, so a mixed load is planned as a custom order: the mix ratio and grading band go into the written specification, and a sample bag is confirmed before booking. That keeps the container auditable against the approved sample instead of leaving the blend to chance at loading.

Is there a lower MOQ for a first trial order?

The export minimum is one 20 ft container per colour and grading, because each combination runs as its own screening and hand-sorting job. What you can do before committing is request sample bags by courier and approve the colour and specification on site; the first full container then serves as the trial, checked against the retained sample.

Which packing should a first container use — retail bags, jumbo bags or pallets?

Follow the end use. Distributors reselling through garden centres usually take 20/25 kg bags, which can carry OEM printing; contractors spreading stone on site tend to prefer 1,000 kg jumbo bags; palletized bags suit buyers who need clean stacking and faster unloading. The choice changes how much usable stone a container delivers, so fix it in the RFQ before booking.

Related articles

Who is responsible for this page

  • PublisherThis article is published by Dalian Taiding Hengxin International Trade Co., Ltd., the export arm of Haicheng Taiding Huaxin Mineral Products Processing Co., Ltd., whose plant is in Haicheng, Liaoning, China.
  • Basis of the dataMesh, whiteness, chemistry and moisture figures come from retained production samples and batch inspection records of our own plant. Statements about standards are quoted verbatim in the sources section at the end of this page, each with a link to the issuing body's official page.
  • Updates and correctionsThis article was last updated on . If you find an error in a figure or a statement, write to info@tdhxtrade.com and we will verify and correct the page, updating the date at the top.

Standards and sources quoted

The quotations below are taken verbatim from published standards; each link goes to the issuing body's official page.

“This test method covers the determination of the particle size distribution of fine and coarse aggregates by sieving.”

— ASTM International, ASTM C136/C136M-25, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, official source

“ISO 3310-1:2016 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth. It applies to test sieves having aperture sizes from 125 mm down to 20 µm, in accordance with ISO 565.”

— ISO — International Organization for Standardization, ISO 3310-1:2016, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth, official source

Need a custom specification?

Tell us your target mesh size, whiteness and application. We send samples and a quotation within 24 hours.

Request a Quote WhatsApp